橡胶加工分析仪RPA2025 是一种集生胶检测、胶料加工特性检测、硫化特性检测、流变特性检测以及硫化后动态机械特性检测于一体的综合性检测设备，利用模腔振荡频率、剪切应变和试验温度的大范围变化，通过用户设定各种子测试一次测得硫化前的胶料动态加工性、硫化特性以及硫化后的物理特性。被测材料包括未硫化橡胶、可硫化胶、生胶以及其他热固性材料，适用于轮胎、橡胶制品、橡胶原材料、石化、军工以及科研院所等在高分子材料配方研究、新型材料开发、生产过程控制以及替代传统检测设备领域里的研究与应用。
Rubber Processing Analyzer RPA2025 is specially designed for tire industry, rubber part factories, raw materials, petrochemicals, military industry and institutes in polymers and new material R&D, production process control to test rubber raw material, uncured rubber, curable rubber and some thermosetting materials by use of the die cavity with its oscillating frequency, shearing strain and temperature in wide range changing to determine their dynamic properties before cure, curability and physical properties post cure by one piece of rubber sample through sub-tests set by users, which test methods are in complied to ASTM D5289, ASTM D6204 and ASTM D6601, as well as other international standards.
规格与参数Data & Specification;
|
国际标准 Standards |
符合ASTM D5289, D6204, D6601及其他有关国际标准 Complied to ASTM D5289, D6204, D6601, etc. |
|
模腔形式 Die Cavity |
密封双圆锥形模腔，下模腔作往复振荡 Sealed By-conical, the Lower Die oscillating |
|
扭矩测量 Torque Meas. |
扭矩传感器, 安装于上模腔 Torque Transducer mounted on the Upper Die. |
|
驱动系统 Driving System |
直驱伺服驱动 DDR Driving System |
|
振荡频率范围 Frequency Range |
0.01~50.00Hz |
|
振荡振幅范围 Amplitude Range |
±0.005°~ ±90.000° (±0.070% ~±1256.000%) |
|
扭矩范围 Torque Range |
0.010 ~230.000 dNm； |
|
温控范围 Temperature Range |
室温~230.00°C±0.3°C |
|
试样体积 Sample Volume |
约Appr. 4.5cm3 |
|
子测试形态 Sub-tests |
硫化试验、预热、频率扫描、应变扫描、变温硫化、… Cure, Time, Frequency Sweep, Stain Sweep, Temperature Variation… |
|
包装尺寸 Packing Size |
长L=80cm 宽D=80cm 高H=170cm |
|
重 量 Weight |
毛重Gross=312kg; 净重Net=246kg |
