品牌:振德精机
发送询价
本机适用于硫化前的橡胶横向切条，采用PLC与人机界面进行控制，操作方便，可以在人机界面里边切边微调，不用停机！
The control system of the machine adopts PLC and human-machine interface , and is sutable for cutting across the rubber before vulcanization . It is easy to operate, and can fine-tune in the man-machine interface ,doesn't need to turn the machine off.
| 机器型号/Model | 520 | 600 | 800 | 1000 |
| 控制方式/ Control type | PLC与人机界面/PLC & HMI | PLC与人机界面/PLC & HMI | PLC与人机界面/PLC & HMI | PLC与人机界面/PLC & HMI |
| 最大料宽/Max Material Width(mm) | 485 | 565 | 765 | 1065 |
| 切刀材质/ Blade material | 高速钢/HIGH SPEED TOOL STEEL | 高速钢/HIGH SPEED TOOL STEEL | 高速钢/HIGH SPEED TOOL STEEL | 高速钢/HIGH SPEED TOOL STEEL |
| 裁切厚度/ Material thickness(mm) | 1-10 | 1-15 | 1-15 | 1-15 |
| 裁切速度 (次/分钟) / Cutting speed(counts per minute) | 60-95 | 60-95 | 60-95 | 60-95 |
| 工作气压/ Working air pressure（Mpa） | 0.4-0.8 | 0.4-0.8 | 0.4-0.8 | 0.4-0.8 |
| 机器电压/ Voltage | 380V | 380V | 380V | 380V |
| 主机总功率/ Total power | 2.2KW | 3KW | 4KW | 5KW |
| 机械尺寸/ Machine size（mm） | 960*1450*973mm | 1451*1108*1279mm | 1451*1308*1279mm | 1451*1508*1279mm |
| 机械重量/ Machine height(KG) | 350KG | 510KG | 610KG | 750KG |
